FHOSS Walkway Programming Guide
Setup
When first using the programming software, ensure you're connected to the internet to download essential files. Once in the programmer, click "download" and wait for it to complete.
Programming
1. Ensure the PCB is powered by 24V.
2. Connect the programming cable to your laptop and to the PCB.
3. Select the COM-port list above the download button and choose the option with the highest number; this will work for most machines.
4. Press and hold the small “BOOT” button on the programmer; then press and release “reset” on the PCB (all blue LEDs will go off); release the “BOOT” button.
5. Click "Program" and the process will begin!
6. Once complete, press the PCB “Reset” button and two blue LEDs will come back on, indicating it’s in “pairing mode”; awaiting its pair to be programmed.
Issues
If you have any issues, please contact me here!